Quantum 1200 Series DAT Autochanger Podręcznik Użytkownika Pobierz pdf (Strona 143)

SDLT 600 SCSI Interface Guide Chapter 4: SCSI Commands

81-81200-02 REV A01 January 2005 4-101

MaxBurstSize Binary 0080h 2 Specifies the maximum amount of

data to be transferred without

disconnecting. A value of 0 sets

no limit. This value is given in

512-byte increments. For example,

a value of 8 indicates 4 KB. The

drive rounds values that are not

multiples of 8 down to the nearest

multiple of 8. Minimum value of

this field is 0000h, maximum value

is FFFFh.

Mod4FixedSize Binary 0 1 When set to 1, limits fixed block

MODE SELECT lengths to a

multiple of 4 bytes.

NoDeferRcvdErr Binary 0 1 When set to 1, the drive reports a

deferred recovered error as a current

recovered error.

NoSCSIEject Binary 0 1 Disables ejection of the cartridge at

the completion of an unload

operation initiated by a SCSI

LOAD UNLOAD command.

RedundancyMode Decimal 1 1 Sets the value of the allowed

maximum marginal channel. Valid

values are 0 to 7.

RepBusyInProg Binary 0 1 When set to 1, the drive reports

BUSY status if it is in the process of

becoming ready.

RepMAMAvailUA ASCII 0 1 When set, the drive reports a UNIT

ATTENTION when the EMAM

data is available.

ReportRcvdPerrs Binary 1 1 When set to 1, the drive reports a

recovered error if parity error

retried successfully.

ReportRcvdRdErr Binary 0 1 Sets the default value of the PER bit

of the Read / Write Error Recovery

Mode Page (01h).

RepUaOnSeqUnld Binary 0 1 Obsolete.

Table 4-58. EEPROM Vendor Specific MODE SELECT Page — Parameter Descriptions

Parameter Name

Data

Type

Default

Length

(Bytes)

Usage

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 293 294

Komentarze do niniejszej Instrukcji

Brak uwag

Quantum 1200 Series DAT Autochanger Podręcznik Użytkownika Strona 143

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie Quantum 1200 Series DAT Autochanger