Quantum 200D/400D Podręcznik Użytkownika Pobierz pdf (Strona 43)

Troubleshooting and Diagnostics 31

If the update is completed successfully, the front panel indicators will display the following:

Indicator State, Character, or Message

Status LED

Amber, solid

Single-character display

2, flashing

LCD

Update Drive FW

Completed!

The drive will rewind and unload the FMR tape while the front panel indicators display the following:

Indicator State, Character, or Message

Status LED

Amber, solid

Single-character display

2, flashing

LCD

Update Drive FW

Unloading =====

The drive will reset itself, and the front panel indicators will display the following:

Indicator State, Character, or Message

Status LED

Off

Single-character display Off

LCD

Ultrium Tape Drive

Drive Empty

5. Cycle (remove, then reapply) power to the LTO standalone. The drive begins to use the new firmware.

If the update fails, the drive posts an error code to the single-character display then retries the operation up to three times. If

the update continues to fail, the front panel indicators display the following:

Indicator State, Character, or Message

Status LED

Amber, flashing

Single-character

display

4, flashing

LCD

Error!

Firmware/Drive Prob

The drive will unload the FMR tape and exit Maintenance Mode.

 To resolve the error, refer to Table 4-2 Error Codes, elsewhere in this chapter.

 To clear the error, cycle (remove, then reapply) power to the LTO standalone.

Create FMR Tape

Use this function to copy data from the drive to a scratch data cartridge.

To select the Create FMR Tape function, perform the following steps:

1. Verify that the drive is in Maintenance Mode by observing that the Status LED is illuminated solid amber.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 64 65

Komentarze do niniejszej Instrukcji

Brak uwag

Quantum 200D/400D Podręcznik Użytkownika Strona 43

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Puste taśmy danych Quantum 200D/400D