Quantum DX5000 Podręcznik Użytkownika Pobierz pdf (Strona 71)

Chapter 3 DX3000 and DX5000 Remote Management

Configuration

Quantum DX3000 and DX5000 User’s Guide 53

Figure 34 Device Mapping Page

2 There are four ways to assign virtual devices to a specific iSCSI or

Fibre Channel port:

•Click Auto Populate (partition per port) to allow the DX3000/

DX5000 controller to automatically assign virtual devices to a

port. The controller assigns a robot and partition to each port.

Example: A system with 1 partition would have a robot assigned

to LUN 0 and all other devices within that partition assigned to

additional LUNs on that port.

•Click Auto Populate (iSCSI only) to allow the DX3000/DX5000

controller to automatically assign virtual devices to ONLY the

iSCSI ports. The controller assigns a robot and partition to each

iSCSI port.

Example: A DX3000/DX5000 has two potential iSCSI ports. A

system with 2 partitions would have a robot assigned to LUN 0

on Eth 1 and Eth 2 and all other devices within that partition

assigned to additional LUNs on that port.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 129 130

Brak uwag

Quantum DX5000 Podręcznik Użytkownika Strona 71