Quantum Tape Drive DLT VS80 Instrukcja Użytkownika Pobierz pdf (Strona 31)

DLT VS80 Tape Drive Installation and Operations Guide

001596-01 Rev A07 May 2004 3-17

10. Secure the tape drive with the mounting screws provided, either in the sides or bottom of the tape

drive sled, as appropriate for the server or workstation chassis. See Figure 3-12.

NOTE: Some servers and workstations require mounting rails for internal

devices. Contact the manufacturer for specific information, as the

mounting rails have varying thicknesses. Consequently, if a different

screw is required to mount the tape drive, use the following guidelines.

CAUTION Using a screw that is too short can result in inadequate

clamping force. Using a screw that is too long can cause

damage to the internal circuit cards. Please see the note

following Figure 3-12 for guidance.

Figure 3-12. Securing the Internal Tape Drive in the Installation Bay

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 49 50

Brak uwag

Quantum Tape Drive DLT VS80 Instrukcja Użytkownika Strona 31