Quantum QVNR Instrukcja Użytkownika Pobierz pdf (Strona 30)

QNVR Installation Manual V1.2

QNVR installation and user manual

2. IP Camera Set up, for live viewing and recording

Note: Please ensure that all IP cameras are connected to the same network as your NVR

and that the network settings for your QNVR are properly setup (See Network Settings).

Overview:

The QNVR allows great flexibility in the configuration of the recording and viewing of the

attached IP cameras.

Live viewing can be configured to either display real time video at up to D1 resolution across

all channels, or to display up to 10 images per second at full HD resolution for each of the 16

inputs.

The recording of video streams can be configured in many different ways using the Schedule

section of the “IP Camera” menu. In this manual the following three methods will be covered:

1. Constant recording – where by the QNVR simply records a single stream from each

camera at a constant rate 24/7

2. Event Boost recording – (For VK2 camera with this function) where by on an event input

to the camera, it will automatically increase the frame rate and resolution of the recorded

image.

3. Stream switching – On an event input to the QNVR, the NVR will seamlessly switch from

low resolution/low frame rate stream to a higher resolution/higher frame rate stream.

Note: It is recommended that only H.264 streams are recorded

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 90 91

Brak uwag

Quantum QVNR Instrukcja Użytkownika Strona 30