Quantum FastStor 2 Podręcznik Użytkownika Pobierz pdf (Strona 22)

22 6-00515-03 Rev A

2. Inspect the shipping box for damage. If you notice any damage, report it to the shipping

company immediately.

3. Open the shipping box and remove the accessories package. Set the accessories package

aside for now.

4. Lift the autoloader and padding out of the box and place it on the work surface, top facing up.

5. Carefully remove the shipping padding from the left and right sides of the autoloader. Then

remove the bag from the autoloader.

Choosing an Installation Location

Choose an installation location that meets the criteria in Table 4-1. See Specifications for more

information about autoloader specifications.

Table 4-1 Location Criteria

CAUTION:

Do not set the autoloader on its end or side.

NOTE:

Save the packing materials in case you need to move or ship the

autoloader in the future.

Requirement Criteria

Standalone requirements Select a location that is flat, sturdy, level, and close to a host

system server. Do not place the autoloader on the floor or other

carpeted surfaces.

CAUTION: Do not place the autoloader on its side or

upside down or stack items that weigh more than 5 KG

(11.02 lbs) on top of the autoloader.

Room temperature 10-35º C (50-95º F)

Power source AC power voltage: 100-127 VAC; 200-240 VAC

Line frequency: 50-60 Hz.

NOTE: Locate the AC outlet near the autoloader. The AC

power cord is the product's main AC disconnect device and

must be easily accessible at all times.

Weight 26 lbs (12 kg)

Air quality Minimal sources of particulate contamination. Avoid areas near

frequently used doors and walkways, stacks of supplies that

collect dust, printers, and smoke-filled rooms.

CAUTION: Excessive dust and debris can damage

tapes and tape drives.

Humidity 20-80% RH

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 67 68

Brak uwag

Quantum FastStor 2 Podręcznik Użytkownika Strona 22