Quantum 1200 Series DAT Autochanger Instrukcja Użytkownika Pobierz pdf (Strona 41)

Chapter 2 SDLT 600 Tape Drive Specifications

Functional Specifications

SDLT 600 Product Manual 25

Table 15 Operating Shock and

Vibration Specifications

Current and Power

Requirements

Table 16 lists the current and power requirements for the two versions of

the SDLT 600 tape drive system (internal and tabletop) configured with

the SCSI interface. Table 17

lists the current and power requirements for

the internal version of the SDLT 600 tape drive system configured with

the Fibre Channel interface. The library version of the SDLT 600 tape

drive uses the same amount of power as the internal version with both

the SCSI and Fibre Channel interfaces. The tabletop version requires AC

power.

The tape drive draws the highest current (and power) during the native

write modes.

Standby is measured with the tape loaded and tensioned or

untensioned, and

Idle is measured with power on with no tape loaded.

Shock

Pulse Shape ½ sine pulse

Peak Acceleration 10 G

Duration 10 ms

Application X,Y,Z axes, twice in each axis (once in each

direction)

Vibration

Type Sine Sweep

Frequency Range 5 to 500 to 5 Hz Upward and downward

sweep

Acceleration Level 0.25 G

0.010" DA

Between 22 and 500 Hz

Between 5 and 22 Hz

(crossover)

Application X,Y,Z axes Sweep rate = 1.0 octave/

minute

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 141 142

Brak uwag

Quantum 1200 Series DAT Autochanger Instrukcja Użytkownika Strona 41