Quantum Scalar 50 Instrukcja Użytkownika Pobierz pdf (Strona 10)

Quantum Scalar 50 Tape Drive Removal and Replacement Instructions

Document 81-81770-01 A01

June 2007

10 Repackaging the Faulty Tape Drive Canister

a Use a flat-blade screwdriver to loosen the two thumbscrews on the

SCSI sub-plate (see figure 5

b Pull the SCSI sub-plate from the drive.

5 Install the new SCSI sub-plate on the tape drive.

6 Tighten the two sub-plate thumbscrews using a flat-blade screwdriver.

7 Replace the SCSI cables you removed in step 3

8 Return power to the drive by setting the Drive Power option to

ON (refer

to Turning Off Drive Power

on page 4).

9 Ensure that the drive LED on the back of the drive canister turns on.

10 If the host does not detect the presence of the tape drive, contact

Customer Support.

Repackaging the Faulty Tape Drive Canister 0

To repackage the faulty tape drive:

1 Attach the unused SCSI sub-plate to the faulty tape drive and tighten the

two thumbscrews using a flat-blade screwdriver (see figure 5

2 Insert the faulty tape drive into the antistatic bag.

3 Place the tape drive in one of the foam covers (see figure 6

Figure 6 Placing the Tape

Drive in the Foam Covers

4 Put the remaining foam cover on top of the tape drive (see figure 7).

Caution: Make sure the thumbscrews are loosened fully before

trying to remove the sub-plate.

Tape drive (in antistatic bag)

Covers

1 2 ... 5 6 7 8 9 10 11 12

Brak uwag

Quantum Scalar 50 Instrukcja Użytkownika Strona 10