Quantum Scalar 50 Instrukcja Użytkownika Pobierz pdf (Strona 4)

Quantum Scalar 50 Tape Drive Removal and Replacement Instructions

Document 81-81770-01 A01

June 2007

4 Turning Off Drive Power

3 Remove the foam from the wrapped tape drive.

4 Remove the tape drive from the antistatic bag.

Turning Off Drive Power 0

There are two ways to turn of the tape drive power, using the operator control

panel (OCP) or using the remote management GUI. Refer to the following

sections:

• Turning Off Drive Power Using the OCP

• Turning Off Drive Power Using the GUI

Turning Off Drive

Power Using the OCP

To turn off tape drive power using the OCP:

1 Press

Ops from the OCP Home screen. The OCP displays the Operations

screen (see figure 1

Figure 1 Operations

Screen

2 From the Ops screen, use the up and down arrows to highlight Drive

Operations

and press Enter.

The

Drive Operations screen displays (see figure 2):

Note: For dual half-height tape drive canisters, both tape drives must be

powered down before removing the tape drive canister.

Caution: Ensure that all tape cartridges are removed from the tape

drives prior to powering down the tape drive. For dual half-

height drive canisters, ensure that tape cartridges have been

removed from BOTH tape drives before powering down the

tape drive.

Exit

1 2 3 4 5 6 7 8 9 10 11 12

Brak uwag

Quantum Scalar 50 Instrukcja Użytkownika Strona 4