Quantum Scalar 50 Instrukcja Użytkownika Pobierz pdf (Strona 5)

Quantum Scalar 50 Tape Drive Removal and Replacement Instructions

Document 81-81770-01 A01

June 2007

Turning Off Drive Power 5

Figure 2 Drive Operations

Screen

3 Use the up and down arrows to select the tape drive to be replaced and

press

Enter.

4 User the up and down arrows to select

pwr off and press Enter.

The tape drive powers down.

Turning Off Drive

Power Using the GUI

To turn off drive power using the remote management GUI:

1 On the host computer, open the internet browser software.

2 In the

Address field, type http://IPaddress/where IP address is the IP

address for the Quantum Scalar 50 library.

3 Enter the username and password and click

OK.

The

Overview page displays (see figure 3):

Note: For dual half-height tape drive canisters, repeat the tape drive

power off process for both tape drives in the canister. If you do

not power down both drives before removing the tape drive

canister, operations in progress can be interrupted causing a

backup job to fail and/or leave a tape cartridge in one of the

tape drives.

Note: Refer to OCP

Home screen for the library IP address.

Note: The default username and password is

admin. If the username

and password have been changed, check with the network

administrator for the library username and password.

1 2 3 4 5 6 7 8 9 10 11 12

Brak uwag

Quantum Scalar 50 Instrukcja Użytkownika Strona 5