Quantum DAT72 Podręcznik Użytkownika Strona 33

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 32
Chapter 2 Installing Internal Tape Drives
Host Operating System
DDS-4/DAT 72 User’s Guide 21
Host Operating System 2
Switches: 5, 6, 7, 8
Default Setting: Microsoft Windows 98/Me/XP/NT/2000/2003 Server
Switches 5 through 8 configure the internal tape drive for a host
operating system. By default, these switches are all ON. This setting
configures the drive for a Microsoft Windows 98/Me/XP/NT/2000/
2003 Server operating system.
To use the internal tape drive with a different operating system:
Set switches 5 through 8 to select the appropriate settings.
Refer to the operating system drive configuration supplement for
information on scripts and other settings for various non-Windows
operating systems. This supplement is available on your Quantum
Resource CD and at
http://www.quantum.com/am/service_support/
Index.aspx.
Table 4 Host Operating
Systems and Corresponding
Switch Settings
Switches
Host Operating System SW5 SW6 SW7 SW8 SW10
Windows NT 4.0 with native
backup applet using Quantum’s
STDAT4.SYS driver (default).
On On On On On
Windows NT 4.0 with native
backup applet using Microsoft’s
4mmDAT.SYS driver.
On On On On Off
Novell 4.11 with native backup
applet using the TAPEDAI
driver or NWTAPE driver dated
after 11/3/99.
Off On On Off On
Novell 4.11 with native backup
using the NWTAPE driver
dated after 11/3/99.
On On On On Off
Przeglądanie stron 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 80 81

Komentarze do niniejszej Instrukcji

Brak uwag