Quantum DAT72 Podręcznik Użytkownika Pobierz pdf (Strona 39)

Chapter 2 Installing Internal Tape Drives

Mounting the Internal Tape Drive

DDS-4/DAT 72 User’s Guide 27

Figure 6 Mounting Holes for

the Internal Tape Drive in a

3.5-inch Installation

Mounting the Drive into a

5.25-inch Drive Bay

The following procedure describes how to mount the drive in a 5.25-inch

drive bay. This procedure assumes your drive has mounting brackets on

the sides.

1 Orient the drive so the front of the drive faces the front of the

computer.

2 Insert the drive into the computer’s drive bay.

3 Align the drive’s front panel with the front panel of the computer.

4 Secure the drive in the mounting bay using four screws on the

bottom or six screws on the top of the drive (see figure 7

5 Proceed to Connecting a SCSI Cable

41.3 mm

(1.63 in)

101.6 mm

(4.00 in)

101.6 mm

(4.00 in)

94.0 mm

(3.70 in)

3.8 mm (0.15 in)

13.0 mm (0.51 in)

2 places

5.0 mm (0.196 in)

2 places

90.0 mm

(3.54 in)

2 places

70.0 mm

(2.75 in)

6.0 mm

(0.24 in)

31.0 mm

(1.22 in)

146.0 mm

(5.75 in)

41.2 mm

(1.62 in)

60.0 mm

(2.36 in)

2 places

21.0 mm (0.83 in)

2 places

Side View

Bottom View

M3.0 x 4 deep min.

(10 places)

M3.0 x 4 deep min.

(4 places)

Note: Tolerance for all dimensions is 0.25mm (0.01 in)

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 80 81

Komentarze do niniejszej Instrukcji

Brak uwag

Quantum DAT72 Podręcznik Użytkownika Strona 39

Komentarze do niniejszej Instrukcji