Quantum P7000 Podręcznik Użytkownika Pobierz pdf (Strona 88)

Chapter 3 Operator Commands

Performing an Inventory

68 Quantum P4000 and P7000 Libraries User’s Guide

Performing an Inventory 3

The

Inventory Tapes command reads the bar code labels of the cartridges

in the tape drives, fixed storage bins, and the load port bins. All elements

that contain cartridges without labels are marked as full with no label.

1 Press the

Inventory Tapes button in the Operator screen.

The GUI displays a “Command In Progress” screen.

2 Press the

Abort button to stop continuous running of the inventory

process, otherwise, the process continues until all storage elements

have been inventoried.

Moving Cartridges 3

The

Move Cartridges command allows you to move any tape cartridge in

the library to the destination you specify. This destination can be a

storage bin, a tape drive, the load port, or the gripper.

To move a cartridge:

1 In the

Operator screen, press the Move Cartridges button.

The GUI displays the

Control: Move Cartridges screen, with the

Source input field active (see figure 39

Note: The inventory process is also stopped if an error is

detected. In this case, the GUI displays an error message.

Note: To move a cartridge from a tape drive, issue an Unload Drive

command as explained in Unloading a Drive

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 167 168

Brak uwag

Quantum P7000 Podręcznik Użytkownika Strona 88