Quantum PX502 Podręcznik Użytkownika Pobierz pdf (Strona 10)

PX502 Tape Library Quick Start Guide

1 Put on an antistatic wrist strap and clip it to the library

chassis.

2IF there is space above the library to remove the top

cover, remove the twelve PHILLIPS screws securing the

top cover and FlexLink cover to gain further access to

the internal packaging restraints (see figure 17

). If there

is no space above the PX502 library to remove the top

cover, continue with Step 3.

Figure 17 Removing the Top

Cover (Optional Step)

3 When the library powers on for the first time, the OCP

asks you: “Are the internal packaging materials

removed?” (OK or NO).

CAUTION: Take standard ESD precautions when

performing this procedure.

4 Press NO to continue. The system asks you again: “Are

the internal packaging materials removed?” (OK or

NO).

5 Press NO to continue. The OCP displays “Doors opened,

magazines released, pull magazines out before power

shutoff. The library waits approximately 30 seconds for

you to open the doors and remove both magazines

from the library.

6 After the library has powered down, remove the foam

restraints by completing the following steps (see

figure 18

a Detach the tie band holding the two sides of the

metal restraints together and remove it from the

library.

b Remove the metal restraints from the library.

c Lift the left foam restraint slightly up and remove it

from the library.

d Slide the right foam restraint to the right until you

are clear of the robotics motor and remove the

restraint from the library.

AUTION: Pressing OK when the internal packaging

restraints are in place will damage the library

robotics.

NOTE: If you are unable to remove the magazines before

the library shuts down. Turn on the library power

and repeat the steps above.

AUTION: Avoid touching the printed circuit board.

AUTION: When removing the foam restraints, ensure

that the robotics umbilical cable is lying

down in the correct position and not across

the robotics track.

1 2 ... 5 6 7 8 9 10 11 12 13 14

Komentarze do niniejszej Instrukcji

Brak uwag

Quantum PX502 Podręcznik Użytkownika Strona 10

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Quantum PX502