Quantum PX502 Podręcznik Użytkownika Pobierz pdf (Strona 7)

PX502 Tape Library Quick Start Guide

Table 4 Back Mounting Bracket

Orientation

Once the location is determined, attach the back

brackets to each side of the library with four M5 x 8

Allen screws (see figure 8

Rack Depth Mounting Position

> 27 to 28 in. Use holes A and C

> 28 to 29 in. Use holes B and D

> 29 to 30 in. Use holes A and C

> 30 to 31 in. Use holes B and D

> 31 to 32 in. Use holes C and E

> 32 to 33 in. Use holes D and F

> 33 to 34 in. Use holes E and G

> 34 to 35 in. Use holes F and H

> 35 to 36 in. Use holes G and I

NOTE: Use the shortest depth number. For example, if

the measurement is 34 in., use holes E and G.

Figure 8 Installing the Back

Mounting Brackets

2 Install the library into the rack as shown in figure 9

and

secure the library to the rack with four PHILLIPS screws.

Figure 9 Installing the PX502 in

the Rack

OTE: If this is a multiple stack configuration, refer to

“Multiple Library Stacks” on page 13 for

information on preparing the library chassis for

passing tape cartridges from one unit to another.

ARNING: The PX502 tape library weighs approximately

52 lbs (23.6 kg). At least two people are

required to lift and install the library.

Right-hand back

bracket shown.

Back mounting

bracket

Allen

screws

PHILLIPS screws

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Brak uwag

Quantum PX502 Podręcznik Użytkownika Strona 7