Quantum PX502 Podręcznik Użytkownika Pobierz pdf (Strona 11)

PX502 Tape Library Quick Start Guide

Figure 18 Removing the Foam

Restraints

e Install the tape cartridge magazines.

f Close the front doors.

g If you have removed the top cover for better access,

install the top cover back on the library.

OTE: Save the robotics restraints and re-usable tie wrap

for later shipping or relocation of the library.

OTE: Refer to the

PX500 Series User’s Guide

(PN 81-

81290) for more information on loading the tape

cartridge magazines.

Tie band

Metal

restraint

Metal

restraint

Foam

restraints

Robotics

umbilical

cable

Setting the Library Options

To set the library options:

1 Turn on the library by pushing power button located on

the bottom left-hand corner of the OCP (see figure 16).

2 The OCP asks you: “Are the internal packaging materials

removed?” (OK or NO).

3 Press OK to continue.

4 The OCP asks again: “Are the internal packaging

materials removed?” (OK or NO).

5 Press OK to continue. The library continues the boot

process. When complete, the Home screen displays.

6 Press Setup from the Home screen. The OCP displays

the Setup screen (see figure 19):

Figure 19 Setup Screen

7 From the Setup screen, use the up and down arrows to

highlight Cabinet and press Enter.

The Cabinet screen displays (see figure 20):

Figure 20 Library Options Screen

8 The Stack role screen allows you to configure the

library as a “Master” or “Slave” in a multiple library

stack. The library is configured “Solo” by default. If this

is a multiple library stack, use the up and down arrows

to highlight Stack role and press Enter displays the

following information about the library:

Enter

1 2 ... 6 7 8 9 10 11 12 13 14

Komentarze do niniejszej Instrukcji

Brak uwag

Quantum PX502 Podręcznik Użytkownika Strona 11

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Quantum PX502