Quantum EC-LLDAA-YF-B Podręcznik Użytkownika Pobierz pdf (Strona 80)

Chapter 4 On-board Remote Management

Commands Page

60 Quantum SuperLoader 3 User’s Guide

1 From any page, click the Commands heading. The Commands screen

displays.

2 From the

Commands page, click Set to Home. This executes a reset

command to the autoloader.

Sequential Operations The Sequential Operations mode supports certain backup applications

that do not manage media. During backup, when one cartridge is read

or written to the end of the tape, the autoloader automatically returns

that cartridge to its designated slot and loads the cartridge from the

next higher numbered slot to the tape drive to be read or written to.

This continues until the backup software stops accessing the drive or

until all the cartridges have been sequentially accessed. The autoloader

does not move the media until the host requests the tape drive to

unload.

Note: The loader must be in Sequential mode, selected from the

Configurations page, to use Sequential Operations.

1 From any page, click the

Commands heading. The Commands screen

displays.

2 From the

Commands page, scroll to Sequential Operations.

3 To sta rt

Sequential Operations, click Start. This moves the first

available cartridge from the storage slot to the drive.

•To stop

Sequential Operations, click Stop. This removes the cartridge

from the drive and places it back into the cartridge's previous

storage slot.

• To resume

Sequential Operations, click Resume. This moves the next

cartridge to the tape drive.

Note: You must perform a Start or Resume command to load a

cartridge into the tape drive before starting a host backup.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 209 210

Brak uwag

Quantum EC-LLDAA-YF-B Podręcznik Użytkownika Strona 80