Quantum Scalar 24 Dokumentacja Pobierz pdf (Strona 63)

Scalar 24 Installation and Operation Guide 55

Checking Status and General Information

You can use the RMU to remotely check the status of a library and obtain general information about the

library. For example, you can check drive status or get the firmware level of your library. The library

automatically backs up vital product data every time you move from an offline to an online state in order to

preserve configuration information.

To check status and obtain general information

1 Click the Status tab.

The following information is displayed:

• Library Status — indicates whether the library is online or offline.

• Drive Status — indicates the type and quantity of tape drives in the library.

• RMU User — indicates the name and location of the user.

• Hostname — indicates the hostname used for the RMU connection.

• IP Address — indicates the IP address for the RMU connection.

• MAC Address — i

ndicates the Media Access Control (MAC) address of the RMU. This is also the

serial number of the RMU.

• Library Serial # — indicates the library serial number. The physical serial number, which appears

on the product safety label, is embedded in this number. This number also includes the vendor ID

and the partition.

• SNMP — indicates whether the SNMP feature is on or off.

• SNMP Alerts — indicates whether the SNMP Alert notification feature is on or off.

• Library Firmware — indicates the current level of library firmware.

• RMU Firmware — indicates the current version level of RMU firmware.

Configuring Network Parameters

You can reconfigure the hostname, IP address, subnet mask, and gateway address through the RMU. This

feature requires you to login to the RMU. See Logging into the RMU

on page 54 for more information.

To configure the network parameters

1 Click the Configuration tab.

2 In the Network Configuration area, enter the new hostname, IP address, subnet mask, and gateway

address.

3 Click Submit and review your changes (indicated in red).

4 Enter your password and click Confirm to complete the procedure.

The new values are saved. Note that you may need to redirect your Web browser.

Configuring SNMP

Simple Network Management Protocol (SNMP) is a set of protocols used to manage nodes on an IP

network. You can configure the RMU to run a SNMP management application.

To configure SNMP

1 Click the Configuration tab.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 153 154

Brak uwag

Quantum Scalar 24 Dokumentacja Strona 63